As an Amazon Associate, I earn from qualifying purchases.
If you want to chop firewood or cut down tree limbs, a saw is an indispensable tool. Although an electric pole and a manual chainsaw are both great devices for cutting high branches, the latter seems to drain out your energy more as you need a ladder to reach those branches. In contrast, the electric ones will clear up more trees quickly.
Make sure you know for certain the assembly order and function of the equipment segments. This helps limit potential risks that might occur when you’re handling an unfamiliar tool. Besides, understanding of the tool and how to use it properly is never redundant. Know how to shut the saw off before trying to start it and how to release a chain brake to reduce potential injury.
The electric pole chainsaw has 3 main components: control set, the pole, and chain saw. The extended pole at the end of the chainsaw will help you reach and cut the branches with ease. To operate the saw, you use a control set on the bottom end of the pole that runs by electric.
To operate the saw, you use a controller on the bottom end of the pole that runs by electric
You should also wear protective gears, including a tough hat, eye goggles, gloves, and boots before beginning your cutting task. Remember to wear long pants when cutting branches by an electric pole chainsaw and say No with sandals or shorts.
Make sure the cutting is clear of people to avoid unwanted accidents when the tree branches are cut down and dropped. You can make a dangerous sign or a board informing about the start and end time of your job. Keep pets and animals away from the site as well. You should also do your job rapidly while cutting because there may be people who need to go through this area.
Choose the tree branch you want to cut. Use both your hands to bring the saw in a vertical spot, and set your feet on a stable position to steady the chainsaw. Next, extend the pole to the required height by using adjustable controls at the end of the pole. After reaching the appropriate height, tighten the connector latch to when you start to sawing firmly.
First, you will cut the branch from the bottom. After that, invert the cut and cut from the top down. Let the two cutting directions tend to intersect.
If you want to saw and cut down larger stems, you should create a V-shaped cut for the tree stem to fall down in your intended direction.
Creating a groove to mark the cutting position can be helpful here. Once cut through the surface of the bark, use a small pressure to cut deeper inside.
All you need to do is increase the speed of your saw when seeing the chainsaw is well placed on the groove that you made. Concentrate and try to bring together your whole power and stability to distribute even cuts on all branches.
If the sawed branch entangled other canopies and can’t fall, use the top of the chainsaw to hitch it till it falls down the ground. Just before it falls to the ground, make sure you are standing in a safe spot. You don’t want those pieces of branch hitting you hard.
After complete your cutting, it’s time to clean the place and bring out all the limbs fallen down. Collect tools and signage. Clean and maintain the saw.
Most of us know that the saw should always be used with the utmost care because it is not a toy. If you are rushed or ignore to follow the procedures, accidents are likely to happen. Safety is the top priority. Using the electric pole chainsaw properly to it become a useful and wonderful tool.