We heard many DYI avid complaints that their handsaws are too tedious to use because it takes away loads of effort and causes strain in the muscle.
So, are you looking for a table saw on-the-go that can make precise cuts for your DIY project? But if you jump to the market, chances are you will be swimming in stocks of choice and probably making the wrong decision.
There are many things to consider when shopping for portable table saws while knowing little about technical specs can be a barrier for novices.
It’s alright! We’ve got a team of the experienced here compiling products in these best portable table saw reviews to help you decide. There is also a buying guide to help you make an informed choice.
Wait no longer! Scroll on and get you your best-fittest portable table saw.
Table of Contents
- What is a Bortable Table Saw?
- How to choose the best portable table saw?
- Best Portable Table Saw Reviews 2020
- Best Portable Table Saw Under $300
- Best Portable Table Saw Under $500
- Best Portable Table Saw Under $1000
- Got your best saw in mind?
What is a Bortable Table Saw?
Simply put, a portable band saw is a piece of equipment that has a smaller cut capability than a conventional band saw, but as its name suggests, you can move the tool around, from job to job.
Portable table saws are ideal to operate in within a limited space as well as for those eyeing to safer cuts than hand saws. It also enables endless possibilities to conduct different projects and anything outside of the workshop.
You can include cutting pipes, signposts, even railroad ties in a minimum vibration and consistent pressure of the blade for cleaner cuts.
How to choose the best portable table saw?
Before getting the hang of the taste out there, you should equip the shopping knowledge to decide what fits you best out of the collection.
Below are some most important factors:
A stationary band saw sure has sufficient power to rip through a thick board, but you get to bring back your project to the base. With a moving table saw, you can take a smaller amount of that power into the field.
Of course, you can’t expect to deliver the same RPMs on a corded band saw, but you may want to consider choosing what kind of power versus how portable you want.
In practice, a motor with 1-2 horsepower works well with wood boards at of 2-inch thick. But for a thicker depth, you want to rig a 3 to 5 hp motor that runs on higher voltage.
The primary of choosing a job site table saw is to enable movable projects. What matters is the pounds of a machine. The lightest saw known to us is at 48 pounds. Other machines are either 20 pounds heavier or more.
But God brought us wheels. If your job site is on a flat floor, wheels can mitigate the saw’s weight allowing you to push. On the other hand, a fix-based saw will be less clumsy on any ground.
This is the factor that decides the efficiency of a table saw as a whole.
Direct drive type has the blade attached right to the motor can transfer all of its power to the cuts. You can notice there is less vibration compared to that of the belt drive type. The direct drive type is relatively cheaper but only capable of small jobs.
The belt drive type transmits power via a V-belt and a pulley system for higher torque. If you tend to perform on thicker wood variants or heavy-duty projects, these drives are more suitable only that it is less safe and more expensive.
In fact, portability makes the saws sacrifice their accuracy. Precision on the portable saw isn’t a thing to expect. However, for the least makeup to that, you can expect in models with excellent fences. On the flip side, you may rely on a stationary saw.
We’ve got the DEWALT DW745 in this review to be less than $300, which is the cheapest for an acceptable efficiency at this price range.
However, keep in mind that the online price is a game where you may see it jumps a few bucks higher tomorrow. That is why we don’t recommend trusting in the tag differences of some dollars. It may not save you anything but deliver defects for a budget option.
Best Portable Table Saw Reviews 2020
|Table Saw||Motor||Power||Speed||Bevel Angle||Dimensions||Weight||Editor’s Rating|
|DEWALT DW745||15 Amp||120v|
|3850 rpm||0° to 45°||22.7 x 29.2 x 16.7||54 lbs||4.6/5|
|Bosch GTS1031||15 Amp||127v|
|5000 rpm||-2° to 47°||26 x 24.8 x 15.5||64.8 lbs||4.0/5|
|DEWALT DWE7480XA||15 Amp||120v||4800 rpm||0° to 45°||26.5 x 25.8 x 17.5||65.9 lbs||4.4/5|
|Bosch Power Tools Tablesaw 4100-10||15 Amp||120v||3650 rpm||0° to 45°||29 x 32 x 13.2||60 lbs||4.4/5|
|SKILSAW SPT70WT-01||15 Amp||120v||5300 rpm||-1° to 46°||24.7 x 26.4 x 15.8||52.9 lbs||4.1/5|
|DEWALT DWE7491RS||15 Amp||120v||4800 rpm||0° to 45°||31 x 24.5 x 31||110 lbs||4.5/5|
It’s time for diving in our editor’s picks for the best portable table saw you can buy.
Carry on and don’t miss the best bang for the buck.
Best Portable Table Saw Under $300
1 – DEWALT DW745 10-Inch Compact Job-Site Table Saw – I Highly Recommended
This machine lies in the most budget segmentation being the best table saw under $300 for those who just enter the industry.
Talking about a couple of features on DEWALT DW745, the first thing is the on and off switch designed to disengage with ease.
The max height of the blade is 3 1/8 of an inch. Right beside that is the lever for moving the angle of the blade which can adjust to 45 degrees.
People got delighted about this table saw by its condensed and light footprint in case you have to move around the job site.
The machine impressed us with its powerful engine rarely seen at this price range. It did handle through a thick piece of oak in our DIY with the high-torque 15-amp motor while spinning at 3,850 rpm for quick, clean cuts.
We also appreciate the small dust collecting system that seems to have less capability for the heavy applications it can work on. We fixed that through by plugging in a hose right in the back for faster cleanup.
If you may try out this model, you can see it stands handsomely on a 24 x 48-inch workbench while providing a generous workspace. You can settle it on the table with screws and bolts. But in case you want to save its portability, make sure you have a steady ground to perform your skill.
The miter gauge is probably the minus point on this saw because it has a hard-to-read dial, making it inconvenient, especially when you have to wear protective goggles.
One of the must-mention highlights here is when buying the Dewalt 745 10-inch table saw, you will have 3 years of warranty plus super responsive customer service and a money-back guarantee in 90 days.
- Easy adjustability
- Extremely portable
- Hassle-free set up
- Not functional dust port
- Lack of rip length
2 – Bosch GTS1031 10-Inch Portable Jobsite Table Saw
First of all, this machine weighs in at a hefty 60 pounds. If you have to go up some stairs or carry it for some distance, that’s a consideration. It will take a dado stack with the optional table insert where it has a large enough arbor to accommodate the component. Minus, there is no stand to come with it.
Note that this power tool has a very square tabletop. The blade alignment is 90 degrees.
There is a riving knife in the mechanism to control the height and remove it. Gladly, we found there are some adjustments for this riving knife and a way to change blade sizes and thicknesses in the manual.
As a job site saw, Bosch GTS1031 has some limitations with it. We don’t expect to build beautiful furniture with this saw unless you could put extra effort into your measurements of each cut. Otherwise, this table cutting machine is safe to use for less heavy-duty DIYs.
- Powerful motor
- Sturdy build
- Great efficiency for the size
- Unpleasant metallic sound
- Wobble blade
Best Portable Table Saw Under $500
3 – DEWALT DWE7480XA 10 in. Portable Table Saw with Table Saw Stand
Dewalt gives another compact table saw for those who are skeptical about the quality of what’s under 300 dollars.
The first thing that attracted us was the fence. It’s on a rack and pinion, allowing you to row the crank on this sprocket system. Using that, you don’t have to mess around tapping on the fence and trying to get it aligned. In other words, it’s always, every time, accurate.
DWE7480XA has the same lever on the right to release and lock the fence on the DW745 model. What makes the unit different is that it comes with a folding stand that lets you migrate your job field to anywhere that might inspire you better than in the workshop.
There are more rpms in the same 15-amp motor which obviously gives you more rips through hardwood.
What might disappoint you could be, again, the miter gauge that does not sit snugly in its tracks. Though it may affect your first square cut on a board, for the rest of the work, things went fine for us.
- Lightweight components
- Secure blade
- Smooth and quiet operation
- Novice-friendly instruction
- Flimsy stand
- Wiggle miter gauge
4 – Bosch Power Tools Tablesaw 4100-10 – Worksite 10 Inch Table Saw – Portable Small Table
In direct competition with DWE7480XA , Bosch made 4100-10 even more mobile and easy to disassemble.
Right out of the bat, we fell in love with its onboard storage which allows you to carry all of your utensils, and whatever you need on the field. So, when you fold this thing up, it secures all of your gear.
This is a 15-amp motor table saw running at 4 hp starting. Now, if you put some heavy-duty materials through, the speed control will put a little more power to the blade to keep you going at full potential.
Talking about the motor, the soft start will give you the feeling of quality of the non-vibrating mechanism. You will see how pleasant it is not to hear the horrific trembling blade.
The table saw has a 25-inch rip capacity. When you lock the fence, there is a visual observation letting you know your unit is unlocked to prevent incidents that ruin your cuts.
We’re going to say that this unit is a heavy one despite the support of the easy pickup frame.
Frankly speaking, the fence on this power tool is not a decent highlight as it glides flimsily, which may take your time putting even pressure on it to move. If you’re in a hurry, you should be careful with the fence, so it doesn’t get hung up.
- Accurate and precise
- Easy pickup
- Friendly to novice
- Jerky fence
5 – SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
The SKILSAW is known in the industry for a while with the toughest worm-drive type that gives you the extra torque and longevity. We believe this table saw under $500 is the world’s first worm drive one.
So, if you don’t know why worm drive SKILSAW is exceptional, here it is. The worm drive actually isolates the motor boosting the capability to rip sheets of ply-woods.
What we really liked about SKILSAW SPT70WT-01 is simplicity. It is small, compact but it has a beast Dual-field motor underneath. For us, it gives smooth and seamless cuts despite the typical loud sound any machine would have.
One nice feature about this saw is everything is tucked away so you don’t need to worry about things getting beat up when you have to travel with it.
A huge flagship feature of this saw is the top extension. So, you can cut 25 inches from blade to end. The height on this machine is also significant if you want to cut through thick plywood. For cutting with angles, you can adjust the crank in front.
You will love SKILSAW for its provided carbide-tipped blade, which is the top in line.
One more plus is about the safeguard and anti-kickback device are quite easy to install, and they work best in keeping your fingers safe.
- Powerful engine
- Precise cuts
- Relatively light
- Quality provided blade
- Easy-to-bevel miter gauge
- Noisy when operates
- No stand available
Best Portable Table Saw Under $1000
6 – DEWALT DWE7491RS 10-Inch Jobsite Table Saw – I Highly Recommended
You probably have guessed what comes as the extraordinary on this table saw from its title.
Yes! DEWALT DWE7491RS has rolling wheeling attached with a steady stand on four clipped legs. So, if you are going to move your job site table saw around, this is an optimal choice.
You’ll get a real riving knife that can pop out with a lever on the side functioning as if it’s an auto lining up. The guard has a built-in riving knife and an improved dust collector for full protection.
There are some neat features added to the fence beside the lock bar, micro rack-and-pinion adjustment. It can reach out at 24 and 5/8 not counting the auxiliary fence that flips down to support your outfeed.
But better than most models we met, you can get this fence further out by undoing the clips right on its sides, then move the fence to its second position. It’ll pick you up another 8 inches or so.
DeWalt makes it different on the switch, too. It comes with a child lock protection. It’s also convenient when you want to turn on the machine with your knee.
The dust port on this saw works a lot better with a full enclosure that funnels the saw dirt into your dust vac. But to be honest, we got a little spit back when we had just used the riving knife. Otherwise, the efficiency of this dust collector is fantastic.
- Great rip capacity
- Solid body saw
- Non-wobble stand
- Perfect mobility
- The size may not fit big users
- Limited height on the fixed stand
Got your best saw in mind?
We would definitely pick the DEWALT DWE7491RS for our job field for its marvelous mobility and generous workspace. It is the machine that gives the less mess out of the way. But if you really expect precision on a portable table saw, we highly recommend the last option from Bosch on this list.
And that’s all!
We hope we’ve been helpful with all the information in those best portable table saw reviews. If you think anyone should need this guide, please like and share, and leave us comments to ask anything.